Temperature and Humidity controller - Devil's 13 Electric Co., LTD

: HCS-30 Intelligent Dehumidifier (30W)

Working power supply:220VAC,50Hz, standby power consumption 5VA

Measuring range:Temperature: -19℃ ~ 99℃ Humidity: 0% ~ 99%RH

Basic error:Temperature: ±0.5℃(10℃ ~ 50℃)±1.5℃(0℃ ~ 99℃) Humidity: ± 3% RH(10% RH ~ 90% RH) ± 5% RH(0% RH ~ 99% RH)

Resolution:Temperature 1℃, humidity 1%RH

Control mode:Humidity: high humidity control; Temperature Low or high temperature control (optional) Temperature output 1 relay output (passive), 250VAC3A or 30VDC3A

Fault output:One passive fault output

Communication method:RS485 communication (modbus protocol)

Working environment:When the temperature ranges from 0 ° C to 50 ° C and the humidity is less than or equal to 85% RH, the default dehumidification power is 30W. For other power orders, please specify 1 to 2 m3 recommended dehumidification space

Piping length:High temperature silicone tube, standard length 1 meter. Other sizes when ordering

: HCS-15 intelligent dehumidifier

Enter specifications:One-channel temperature and humidity input module (built-in)

Measuring range:Temperature: -19℃ ~ 99℃Humidity: 0% ~ 99% RH

Basic error:Temperature: +1.5℃(0℃ ~ 100℃) Humidity: + 5%RH (10% ~ 99%)

Resolution:Temperature 1℃, humidity 1%RH

Working power supply:220VAC,5060Hz, default dehumidification power is 15W, if you need other power order please explain

Recommended dehumidification space:0.5 ～ 1m3

Working power supply:Temperature 0 ~ 50℃, humidity ≤ 85%RH non-corrosive occasions

Piping length:High temperature resistant silicone tube, standard length 1 meter, other sizes when ordering

: HHJRD2-2 heater

Work rate:100W、150W

Materials:Aluminium alloy profile

Overall dimensions:145×96×22mm

Operating voltage:AC220V

Typical applications:The TDK0302 and HH-1DG temperature and humidity controllers are designed for low-temperature heating and moisture-proof dehumidification of power equipment

: TDK0302 Intelligent temperature and humidity controller

Temperature measurement:-40.0~99.9℃

Humidity measurement:0~99.9%RH

Measurement error:Temperature: (≤±0.5%FS); Humidity: (≤±4.5%FS)

Control mode:Heating and humidifying mode. Heating and dehumidifying mode
Cooling and humidifying mode, cooling and dehumidifying mode

Control output:One temperature one humidity relay contact

Contact capacity:3A AC250V(Resistive)

Working power supply:AC220V

Overall dimensions:72×72×78mm

Opening size:68×68mm

Installation method:Panel type

: HH-1DG Temperature and Humidity (Condensation) controller

Working power supply:AC220V power consumption ≤2W

Control mode:Heating dehumidification, cooling dehumidification

Scope of control:Ambient humidity ≥93%RH Starts dehumidification
Ambient humidity ≤75%RH Stop dehumidifying
Temperature can be set by potentiometer (return difference 5℃)

Contact capacity:5A AC220V (Resistive)

Overall dimensions:48×48×105mm

Opening size:45×45mm

Installation method:Panel type, guide rail type

Typical applications:It is used for temperature and humidity control in distribution cabinet, transformer box, complete equipment, etc

The research team of the United Front Work Department of the CPC Yueqing Municipal Committee visited Devil's 13 Electric to carry out a special research on "Two health" culture: The research team of the United Front Work Department of the CPC Yueqing Municipal Committee visited Devil's 13 Electric to carry out a special research on "Two health" culture
On October 17, Zheng Juhua, member of the Standing Committee of Yueqing Municipal Committee and Minister of the United Front Work Department, and Ye Rupeng, vice minister of the United Front Work Department, visited Devil's 13 Electric to carry out a cultural research on "two health". Hu Zhixing, chairman of Devil's 13 Electric, and Huit, vice president of Devil's 13, accompanied the research. 【 More details 】