Professional manufacturer of industrial control componentsSince 1979

Control mode:The 4-20mA, 0-5V, and 0-10V modes are available

Output mode:Phase output, phase shift range 0-150°

Load voltage:Three-phase 380VAC(Three-phase three-wire)

Load current:25A

Protection function:Fast fuse

Alarm function:Phase break, overtemperature, relay output (1A250VAC)

Medium voltage:≥2000VAC

Display function:LED panel displays SCR output percentage and working status indication

Installation method:Bolt mounting

Usage load:Constant impedance electric heating wire, IR far infrared, UV lamp, etc

Appearance size:150×130×168mm

Cooling method:Natural cooling

Control mode:The 4-20mA, 0-5V, and 0-10V modes are available

Output mode:Phase output, phase shift range 0-150°

Load voltage:Three-phase 380VAC(Three-phase three-wire)

Load current:75、100A

Protection function:Fast fuse

Alarm function:Phase break, overtemperature, relay output (1A250VAC)

Medium voltage:≥2000VAC

Display function:LED panel displays SCR output percentage and working status indication

Installation method:Bolt mounting

Usage load:Constant impedance electric heating wire, IR far infrared, UV lamp, etc

Appearance size:218×130×168mm

Cooling method:Forced air cooling

Rated voltage:AC200~480V  50/60Hz

Trigger current:300mA trigger 2000A thyristor

Auxiliary power supply:PCB board working power supply, AC220V±10% 5060Hz
Control end LN, N line must be connected to the neutral line

Input signal:4-20mA0-5V0-10V switch conversion

Use environment:Temperature -10~55℃; Humidity below 90%RH

Compressive strength:Insulation voltage AC2500V1 min
Input and output isolation voltage AC2000V

Alarm output:A set of normally open and normally closed output points, contact capacity: 250VAC1A

Soft start stop:Soft start Soft stop 1 to 41 seconds adjustable

Protection function:Load phase loss detection, auxiliary power LN connected to reverse

Overall dimensions:145×90×40mm